4-Port Serial WAN Interface card # NIM-4T
Sale Price: US$ 768.00 (74.4% OFF)
List Price:
US$ 3,000.00
Condition: New Sealed
Delivery Time: Exstock
Cisco® 4400 Series Integrated Services Router Network Interface Modules (ISRNIMs) provide highly reliable synchronous serial WAN connections for remote sites. These interfaces use well-known point-to-point WAN protocols such as High-Level Data Link Control (HDLC) and Point-to-Point Protocol (PPP) as well as Frame Relay, offering cost-effective virtualized WAN connections in both point-to-point and point-to-multipoint designs. You can mix and match NIMs to tailor cost-effective solutions for common networking solutions for low- and high-density WAN aggregation.
Cisco offers three new synchronous serial NIMs:
- Cisco 1-Port Serial WAN Network Interface Card (NIM-1T)
- Cisco 2-Port Serial WAN Network Interface Card (NIM-2T)
- Cisco 4-Port Serial WAN Network Interface Card (NIM-4T)
WAN Access and Aggregation
Figure 1 shows two typical serial WAN connection scenarios between two locations. With support for serial speeds up to 8 Mbps per port, the 2- and 4-port serial NIMs are ideal for low- and medium-density WAN aggregation (Figure 2). Bisynchronous and X.25 standards are not supported on these modules.
Figure 1. WAN Connections (Sync)
Figure 2. WAN Concentration
Ordering Information
Table 1 gives ordering information, and Table 2 lists supported platforms and quantities.
Table 1. Cisco 1- and 2-Port Serial NIMs
Part Number | Description |
NIM-1T | 1-Port Serial WAN Interface Card |
NIM-2T | 2-Port Serial WAN Interface Card |
NIM-4T | 4-Port Serial WAN Interface Card |
The Cisco 4400 Series ISRs require Cisco IOS® Software Release XE3.12 or later and the IP Base feature set as a minimum.
Table 2. Supported Platforms and Quantities
Platforms | NIM-1T | NIM-2T | NIM-4T |
Cisco 4451-X | 3 | 3 | 3 |
Connectors and Cabling
The NIM-1T, NIM-2T, and NIM-4T use Cisco Smart Serial connectors. These ports use the same connectors and cabling as the HWIC-4A/S and HWIC-2A/S modules for the Cisco Integrated Services Routers Generation 2 (ISRG2) routers. The supported cables are noted in Table 3.
Table 3. Smart Serial Cabling for NIM-1T, NIM-2T, and NIM-4T
Product Number | Cable Type | Length | Connector Type |
CAB-SS-V35MT | V.35 DTE | 10 ft (3m) | Male |
CAB-SS-V35FC | V.35 DCE | 10 ft (3m) | Female |
CAB-SS-232MT | EIA/TIA-232 DTE | 10 ft (3m) | Male |
CAB-SS-232FC | EIA/TIA-232 DCE | 10 ft (3m) | Female |
CAB-SS-449MT | EIA/TIA-449 DTE | 10 ft (3m) | Male |
CAB-SS-449FC | EIA/TIA-449 DCE | 10 ft (3m) | Female |
CAB-SS-X21MT | X.21 DTE | 10 ft (3m) | Male |
CAB-SS-X21FC | X.21 DCE | 10 ft (3m) | Female |
CAB-SS-530MT | EIA/TIA-530 DTE | 10 ft (3m) | Male |
CAB-SS-530AMT | EIA/TIA-530A DTE | 10 ft (3m) | Male |
Specifications
NIM specifications are listed in Tables 4 and 5.
Table 4. NIM Signaling and Telecom Specifications
Specification | NIM-1T | NIM-2T | NIM-4T |
Synchronous support | Yes | Yes | Yes |
Synchronous maximum speed (per port) | 8 Mbps | 8 Mbps | 8 Mbps |
Serial protocols | EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21 | EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21 | EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21 |
Telecomm post, telephone, and telegraph (PTT) | • TBR1 and 2
• JATE digital |
• TBR1 and 2
• JATE digital |
• TBR1 and 2
• JATE digital |
Table 5. Homologation Specifications for NIM-1T, NIM-2T, and NIM-4T
Specification | Data |
Safety | • UL 60950-1 (United States)
• CAN/CSA 22.2, 60950-1 (Canada) • AS/NZS 60950-1 (Australia/New Zealand) • EN60950-1 (Europe) • IEC 60950-1 (International) |
Immunity | • EN300386
• CISPR24 • EN55024 • EN50082-1 • 61000-4-2/3/4/5/6/8/11 |
Emissions | • FCC Part 15 Class A
• ICES-003 Class A • EN55022 Class A • CISPR22 Class A • AS/NZSCISPR22 Class A • VCCI Class A • EN 300386 • EN61000-3-2/3 • CNS13438 |
Physical specifications | • Singlewide NI, no slot restrictions
• Dimensions (H x W x D) 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm) |
Environmental specifications | • Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -4 to 149°F (-20 to 65°C) • Relative humidity: 10 to 90%, noncondensing |
4-Port Serial WAN Interface card # NIM-4T