C6k 48-port 1GE Mod:fabric-enabled with DFC4XL # C6800-48P-SFP-XL
Sale Price: US$ 11,960.00 (80.0% OFF)
List Price:
US$ 59,800.00
Condition: New Sealed
Delivery Time: Exstock
The Cisco® Catalyst® 6807-XL switch offers two new Gigabit Ethernet modules that work with the Catalyst Supervisor Engine 2T/2TXL. The modules also work in Catalyst6500 Series Switches.
The Gigabit Ethernet modules serve campus and data center networking requirements in enterprise, commercial, and service provider environments. They include a 48-port Gigabit Ethernet Copper Module and 48-port Gigabit Ethernet Fiber Module.
The Gigabit Ethernet Copper Module supports RJ-45 connectors. It supports operational distances of up to
100 meters over Category 5, 5E, and 6 Unshielded Twisted Pair (UTP) copper cabling. The Gigabit Fiber
Module supports pluggable optics and supports operational distances of up to 80 km over single-mode and multimode fiber.
There are four different 1-Gbps modules supported by Supervisor 2T and 2TXL:
- C6800-48P-SFP and C6800-48P-SFP-XL: 48-port SFP fiber Gigabit Ethernet Module with DFC4 and DFC4XL (Figure 1)
- C6800-48P-TX and C6800-48P-TX-XL: 48-port Copper Gigabit Ethernet Module with DFC4 and
DFC4XL (Figure 2)
Figure 1.
48-Port Fiber Gigabit Ethernet Module
Figure 2.
48-Port 10/100/1000 Copper Module
Below are a few key details about the fiber and copper line cards:
- Backplane connection:Connects to the switch fabric using dual full-duplex 20-Gbps switch fabric channels (40 Gbps total).
- Chassis/slot support:Can occupy slots 1-2 and 5-7 in C6807-XL chassis. Can occupy any slots in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E.
- Supervisor engine:Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL.
- Distributed forwarding and performance:Comes equipped with DFC4 or DFC4XL daughter cards, delivering optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding.
Table 1 summarizes the primary features of the 6800 Series Gigabit Ethernet fiber and copper modules.
Table 1. C6800 Series Gigabit Ethernet Fiber and Copper Modules Primary Features
| Product | Transceiver Type | Ports/Interface/Connectors | Port Density/Chassis Model | Maximum Frame Size | Queues per Port (Tx = Transmit, Rx = Receive)** | Scheduler | Buffer Size per Port | Onboard Memory |
| C6800-48P-TX and C6800-48P-TX-XL | RJ-45 | 48-port, RJ-45, 100m, Category 5 cable | ● 240 ports/C6807-XL
● 528 ports/6513E ● 384 ports/6509E |
Up to 9216 bytes/frame | ● Tx-1p3q8t; Rx‑2q8t | DWRR | ● Rx-166KB
● Tx-1.17MB |
1GB Default |
| C6800-48P-SFP and C6800-48P-SFP-XL | Small Form-factor Pluggable (SFP) | 48 port; 1000BASE-SX, LX/LH, -ZX, -T; 1000BASE-CWDM; LC connecter | ● 240 ports/C6807-XL
● 528 ports/6513E ● 384 ports/6509E |
Up to 9216 bytes/frame | ● Tx-1p3q8T
● Rx-2q8T |
Deficit Weighted Round Robin (DWRR) | ● Rx-166KB
● Tx-1.17MB |
1GB Default |
* Queues Legend: 1p3q1t = 1 priority queue, 3 round robin queues, 1 threshold.
Table 2 summarizes the interfaces and distances supported by the 6800 Series Gigabit Ethernet Fiber modules.
Table 2. C6800 Gigabit Ethernet Fiber Modules Supported Interfaces and Distances
| Module | SFP | Wavelength (nm) | Fiber/Cable Type | Core Size (micron) | Model Bandwidth (MHz/km) | Cable Distance |
| C6800-48P-SFP and C6800-48P-SFP-XL | 1000BASE-SX | 850 | MMF | ● 62.5
● 62.5 ● 50.0 ● 50.0 |
● 160
● 200 ● 400 ● 500 |
● 220m (722 ft)
● 275m (902 ft) ● 500m (1640 ft) ● 550m (1804 ft) |
| C6800-48P-SFP and C6800-48P-SFP-XL | 1000BASE-LX/LH | 1300 | MMF*
SMF |
● 62.5
● 50.0 ● 50.0 ● 9/10 |
● 500
● 400 ● 500 |
● 550 m (1804 ft)
● 550 m (1804 ft) ● 550 m (1804 ft) ● 10 km (32,810 ft) |
| C6800-48P-SFP and C6800-48P-SFP-XL | 1000BASE-ZX | 1550 | SMF | 9/10 | - | 43.4 to 62 miles (70 to 100 km)** |
| C6800-48P-SFP and C6800-48P-SFP-XL | 1000BASE-T | - | Category 5 | - | - | 100 m (328 ft) |
| * Mode-conditioning patch is required. Using an ordinary patch cord with MMF, 1000BASE-LX/LH SFP/GBICs, and a short link distance (10s of meters) can cause transceiver saturation resulting in an elevated Bit Error Rate (BER). In addition, when using the LX/LH SFP/GBIC with 62.5 micron diameter MMF, you must install a mode-conditioning patch cord between the SFP and the MMF cable on both the transmit and receive ends of the link. The mode-conditioning patch cord is required for link distances greater than 300 m (984 ft).
** 1000BASE-ZX-SFP can reach up to 100 km by using dispersion-shifted SMF or low attenuation SMF; the distance depends on fiber quality, number of splices and connectors. |
||||||
For complete list of transceivers supported by the C6800 1 Gigabit Fiber modules please refer to “Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix” at
https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html.
Platform Support/Compatibility
Table 3 describes platform support and compatibility for the 48-port 6800 Gigabit Ethernet modules.
Table 3. Platform Support/Compatibility
| Feature | 48-Port 6800 Series Gigabit Ethernet Fiber Modules | 48-Port 6800 Series Gigabit Ethernet Copper Modules |
| Supervisor engines supported | Cisco Catalyst 6500 Supervisor Engine 2T and 2TXL | Cisco Catalyst 6500 Supervisor Engine 2T and 2TXL |
| Chassis supported | ● Any Cisco Catalyst 6807-XL, 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E (NEBS compliant) and 6513-E chassis
● Not supported in non-E Series chassis |
● Any Cisco Catalyst 6807-XL, 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E (NEBS compliant) and 6513-E chassis
● Not supported in non-E Series chassis |
| Slot requirements | ● Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL chassis
● Can occupy slots 1-6 and 9-13 in a Cisco Catalyst ● Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E or 6509-V-E or chassis |
● Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL chassis ● Can occupy slots 1-6 and 9-13 in a Cisco Catalyst ● Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E or 6509-V-E or chassis |
Table 4 lists product specifications of the C6800 Series Gigabit Ethernet Fiber and Copper Modules.
Table 4. Product Specifications
| Item | Specification(s) |
| Standard protocols | ● IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3z, IEEE 802.3ab, and IEEE 802.3ad
● 1000BASE-T, 1000BASE-X (GBIC), 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, CWDM |
| Physical specifications | ● Occupies one slot in the Cisco Catalyst 6807-XL or one slot in the 6500 E-Series chassis
● Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm) |
| Environmental conditions | Temperature:
● Operating temperature: 32 to 104°F (0 to 40°C) ● Storage temperature: -40 to 167°F (-40 to 75°C) ● Relative humidity 10 to 90% noncondensing Operating altitude: ● Agency-certified for operation: -500 to 6500 ft (-150 to 2000m) ● Designed and tested for operation -500 to 10000 ft (-150 to 3000m) |
| NEBS criteria levels | SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4) |
| ETSI | ● ETS 300 019-2-1, Class 1.1 Storage
● ETS 300 019-2-2, Class 2.1 and 2.2 Transportation ● ETS 300 019-2-3, Class 3.1E Stationary Use |
| Regulatory Compliance | EMC Compliance:
● FCC Part 15 (CFR 47) Class A ● VCCI Class A with UTP, Class B with STP ● EN55022 Class A with UTP, Class B with STP ● CISPR 22 Class A with UTP, Class B with STP ● CE marking ● AS/NZS 3548 Class A with UTP, Class B with STP Safety Compliance: ● UL 1950 ● CSA C22.2 No.950 ● EN 60950 ● IEC 950 ● AS/NZS 3260 ● IEC 825 ● EN 60825 ● 21CFR1040 |
| Network management | ● ETHERLIKE-MIB (RFC 1643)
● IF-MIB (RFC 1573) ● Bridge MIB (RFC 1493) ● CISCO-STACK-MIB ● CISCO-VTP-MIB ● CISCO-CDP-MIB ● RMON MIB (RFC 1757) ● CISCO-PAGP-MIB ● CISCO-STP-EXTENSIONS-MIB ● CISCO-VLAN-BRIDGE-MIB ● CISCO-VLAN-MEMBERSHIP-MIB ● ENTITY-MIB (RFC 2037) ● HC-RMON ● RFC1213-MIB (MIB-II) ● SMON-MIB |
| Power Requirements | ● C6800-48P-SFP and C6800-48P-SFP-XL: 334.44 and 339.44 Watts respectively
● C6800-48P-TX and C6800-48P-TX-XL: 405 and 410 Watts respectively ● Go to https://www.cisco.com/go/powercalculator for easy power consumption calculation |
| Indicators | ● Status: green (operational), red (faulty), and orange (module booting)
● Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected) |
Table 5 provides part numbers needed for ordering.
Table 5. Part Numbers for Ordering
| Part Numbers | Description |
| 6800 Series 1 Gigabit Modules | |
| C6800-48P-SFP | Cisco Catalyst 6800 48-port 1GE fiber module with integrated DFC4 |
| C6800-48P-SFP-XL | Cisco Catalyst 6800 48-port 1GE fiber module with integrated DFC4XL |
| C6800-48P-SFP= | Cisco Catalyst 6800 48-port 1GE fiber module with integrated DFC4 spare |
| C6800-48P-SFP-XL= | Cisco Catalyst 6800 48-port 1GE fiber module with integrated DFC4XL spare |
| C6800-48P-TX | Cisco Catalyst 6800 48-port 1GE copper module with integrated DFC4 |
| C6800-48P-TX-XL | Cisco Catalyst 6800 48-port 1GE copper module with integrated DFC4XL |
| C6800-48P-TX= | Cisco Catalyst 6800 48-port 1GE copper module with integrated DFC4 spare |
| C6800-48P-TX-XL= | Cisco Catalyst 6800 48-port 1GE copper module with integrated DFC4XL spare |
C6k 48-port 1GE Mod:fabric-enabled with DFC4XL # C6800-48P-SFP-XL
